millipore,
密理博,CS20MS05F1,Clarisolve 20 µm Pod Depth Filters, 0.55 m2 (5.92 ft2)
重要规格表
| Description
|
| Catalogue Number | CS20MS05F1 |
| Trade Name |
|
| Description | Clarisolve® 20 µm Pod Depth Filters, 0.55 m2 (5.92 ft2) |
| Product Information
|
| Device Configuration | Pod |
| Filter Grade | 20MS |
| Maximum Differential Pressure, bar (psid) | Maximum: 3.5 bar (50 psid) @ ≤ 25 °C or 1.0 bar (15 psid) @ ≤ 80 °C; Forward: 2.1 bar (30 psid) @ ≤ 25 °C or 1.0 bar (15 psid) @ ≤ 80 °C; Reverse: 2.1 bar (30 psid) @ 25 °C |
| Applications
|
| Application | High-density cell cultures |
| Biological Information
|
| Bacterial Endotoxins | Aqueous extraction contains <0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) clot test technique |
| Sterilization | Integrity is maintained after 1 autoclave cycle of 60 minutes at 123 °C. |
| Physicochemical Information
|
| Product Water Conductivity at 25°C | 0.80 – 1.59 µS/cm post autoclave (1 cycle of 60 minutes at 123 °C) and flushed at a flux rate of 600 LMH pure water flush for 10 minutes. A sample of filtrate was pulled every 2 minutes during flush and tested for conductivity. |
| Dimensions
|
| Height | 32 cm (12.5 in.) |
| Width | 12.2 cm (4.8 in.) |
| Length | 62 cm (24.2 in.) |
| Filtration Area | 0.55 m² |
| Materials Information
|
| Chemistry |
|
| Device Material |
|
| Materials of Construction | Polypropylene and Millistak+® media |
| Seal Material | Thermo Plastic Elastomer (TPE) |
| Packaging Information
|
| Material Size | 1 |
| Specifications
|
| Metals |
- Per 24-hour static soak in 10 liters pure water post autoclave (1 cycle of 60 minutes at 123 °C) and pure water flush of 10 liters per ft2 (100 L/m2) of surface area:
Aluminum (AI): ≤ 0.035 mg/ft2
Antimony (Sb): 0.000 mg/ft2
Arsenic (As): ≤ 0.010 mg/ft2
Barium (Ba): ≤ 0.148 mg/ft2
Bismuth (Bi): below detectable limits
Boron (B): below detectable limits
Cadmium (Cd): 0.000 mg/ft2
Calcium (Ca): ≤ 20.6 mg/ft2
Chromium (Cr): ≤ 0.049 mg/ft2
Cobalt (Co): < 0.001 mg/ft2
Copper (Cu): ≤ 0.012 mg/ft2
Gallium (Ga): below detectable limits
Germanium (Ge): below detectable limits
Iron (Fe): ≤ 0.044 mg/ft2
Lead (Pb): 0.000 mg/ft2
Lithium (Li): ≤ 0.022 mg/ft2
Magnesium (Mg): ≤ 7.88 mg/ft2
Manganese (Mn): ≤ 0.012 mg/ft2
Mercury (Hg): < 0.001 mg/ft2
Molybdenum (Mo): ≤ 0.108 mg/ft2
Nickel (Ni): ≤ 0.010 mg/ft2
Potassium (K): ≤ 2.09 mg/ft2
Silver (Ag): below detectable limits
Sodium (Na): ≤ 60.8 mg/ft2
Strontium (Sr): ≤ 0.50 mg/ft2
Tin (Sn): 0.000 mg/ft2
Titanium (Ti): ≤ 0.142 mg/ft2
Tungsten (W): ≤ 0.008 mg/ft2
Vanadium (V): ≤ 0.246 mg/ft2
Zinc (Zn): ≤ 0.020 mg/ft2
|
| TOC | 1.4–2.1 µg/L post autoclave (1 cycle of 60 minutes at 123 °C) and flushed at a flux rate of 600 LMH pure water flush for 10 minutes. At the end of the flush, a sample was pulled for TOC typical values. |
