millipore,
密理博,VPVH10CN1,Viresolve180 Process Area Module (10-stack)
重要规格表
| Description
|
| Catalogue Number | VPVH10CN1 |
| Trade Name |
|
| Description | Viresolve®180 Process Area Module (10-stack) |
| Product Information
|
| Device Configuration | Virus Removal Module |
| Filter Code | VPVH |
| Maximum Inlet Pressure, bar (psi) | 0.35 bar (5 psi) @ 4–37 °C |
| Maximum Transmembrane Pressure | 0.35 bar (5 psig) @ 4–37 °C |
| Good Manufacturing Practices | These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. |
| NMWL | ≤180,000 kDa |
| Quality Level | MQ400
|
| Applications
|
| Key Applications |
|
| Biological Information
|
| Sterilization | Not autoclavable or steam-sterilizable |
| Physicochemical Information
|
| Gravimetric Extractables | The extractables level was equal to or less than 100 mg after 24 hours in water at controlled room temperature. |
| Permeate Flow Rate Range | 100 mL/min–720 mL/min |
| pH Range | pH4 – pH8 |
| CorrTest | ≥ 1.1 @ 1030 mbar (15 psig) |
| Hold-up Volume | 825 mL |
| Non-Fiber Releasing | This product was manufactured with a Viresolve® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). |
| USP Bacterial Endotoxins | A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. |
| Dimensions
|
| Height | 6.7 cm (2.63 in.) |
| Width | 19.4 cm (7.6 in.) |
| Length | 38.6 cm (15.2 in.) |
| Filtration Area | 0.69 m² |
| Weight | 4.1 kg (9.0 lb.) |
| Device Size | 10 Stack |
| Materials Information
|
| Chemistry |
- Polyvinylidene Fluoride (PVDF)
|
| Device Material |
|
| Packaging Information
|
| Material Size | 1 |
