millipore,
密理博,MPHL20CA3,Gamma Compatible Millipak-200 Filter Unit 0.45 µm 9/16 in. HB/HB
重要规格表
| Description
|
| Catalogue Number | MPHL20CA3 |
| Trade Name |
|
| Description | Gamma Compatible Millipak®-200 Filter Unit 0.45 µm 9/16 in. HB/HB |
| Product Information
|
| Device Configuration | Capsule |
| Connections, Inlet/Outlet | 14 mm (9/16 in.) Hose Barb |
| Maximum Differential Pressure, bar (psid) | Forward: 4.1 bar (60 psid) @ 25 °C; 1.7 bar (25 psid) @ 80 °C; 0.35 bar (5 psid) @ 123 °C; Reverse: 0.7 bar (10 psid) @ 25 °C |
| Maximum Inlet Pressure, bar (psi) | 5.2 bar (75 psi) @ 25 °C |
| Good Manufacturing Practices | These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. |
| Quality Level | MQ400
|
| Biological Information
|
| Bacterial Endotoxins | Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test |
| Media | Durapore® |
| Sterility | Other |
| Sterilization | 3 autoclave cycles of 90 min @ 123°C; not in-line steam sterilizable |
| Wettability | Hydrophilic |
| Physicochemical Information
|
| Pore Size | 0.45 µm |
| Inlet Connection | Hose Barb |
| Outlet Connection | Hose Barb |
| Bubble Point at 23 °C | ≥1790 mbar (26 psig) air with water |
| Flow Rate | 23 L/min @ 2.1 bar ΔP |
| Gravimetric Extractables | The extractables level was equal to or less than 5 mg per device after 24 hours in water at controlled room temperature. |
| Non-Fiber Releasing | This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). |
| USP Bacterial Endotoxins | A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. |
| Dimensions
|
| Filtration Area | 1000 cm² |
| Process Volume | 100 L |
| Inlet Connection Diameter | 9/16 in. |
| Outlet Connection Diameter | 9/16 in. |
| Materials Information
|
| Chemistry |
- Polyvinylidene Fluoride (PVDF)
|
| Device Material |
|
| Support Material | Polycarbonate |
| Vent Cap Material | Polyvinylidene fluoride (PVDF) |
| Packaging Information
|
| Material Size | 3 |
| Material Package | Double Easy-Open bag |
| Specifications
|
| Oxidizable Substances | Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥200 mL |
