millipore,
密理博,MPGL10CB1,Gamma Compatible Millipak-100 Filter Unit 0.22 µm 1/4 in. NPTM
重要规格表
| Description
|
| Catalogue Number | MPGL10CB1 |
| Trade Name |
|
| Description | Gamma Compatible Millipak®-100 Filter Unit 0.22 µm 1/4 in. NPTM |
| Product Information
|
| Device Configuration | Capsule |
| Good Manufacturing Practices | These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. |
| Stacked Discs | 100 discs |
| Quality Level | MQ400
|
| Biological Information
|
| Media | Durapore® |
| Sterility | Other |
| Sterilization | 3 autoclave cycles of 90 min @ 123°C; not in-line steam sterilizable |
| Bacterial Retention | Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology. |
| Wettability | Hydrophilic |
| Physicochemical Information
|
| Pore Size | 0.22 µm |
| Inlet Connection | NPT |
| Outlet Connection | NPT |
| Gravimetric Extractables | The extractables level was equal to or less than 2.5 mg per device after 24 hours in water at controlled room temperature. |
| Non-Fiber Releasing | This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). |
| USP Bacterial Endotoxins | A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. |
| Dimensions
|
| Length | 13 cm (5.12in.) |
| Inlet Connection Diameter | 1/4 in. |
| Outlet Connection Diameter | 1/4 in. |
| Materials Information
|
| Chemistry |
- Polyvinylidene Fluoride (PVDF)
|
| Packaging Information
|
| Material Size | 1 |
