millipore,
密理博,LAHL04PP6,Optiseal Durapore Cartridge Filter 0.45 µm
重要规格表
| Description
|
| Catalogue Number | LAHL04PP6 |
| Trade Name |
|
| Description | Optiseal® Durapore® Cartridge Filter 0.45 µm |
| Product Information
|
| Device Configuration | Cartridge |
| Maximum Differential Pressure, bar (psid) | Forward: 5.5 bar (80 psid) @ 25 °C; 3.5 bar (50 psid) @ 80 °C; 0.35 bar (5 psid) @ 121 °C. Reverse: 3.5 bar (50 psid) @ 25 °C KEEP |
| Maximum Inlet Pressure, bar (psi) | Forward - 5.5 bar (80 psi) @ 25 °C; 3.5 bar (50 psi) @ 80 °C; 0.35 bar (5 psi) @ 121 °C; Reverse - 3.5 bar (50 psi) @ 25 °C |
| Cartridge Code | Double O-rings (2-123) with hold-down tabs |
| Good Manufacturing Practices | These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. |
| Quality Level | MQ400
|
| Biological Information
|
| Bacterial Endotoxins | Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test |
| Media | Durapore® |
| Sterilization | 30 SIP cycles of 30 min @ 135 °C; 10 autoclave cycles of 30 min @ 126 °C |
| Wettability | Hydrophilic |
| Physicochemical Information
|
| Pore Size | 0.45 µm |
| Air Diffusion at 23 °C | ≤4 mL/min @ 1.5 bar (22 psig) in water |
| Bubble Point at 23 °C | ≥1930 mbar (28 psig) air with water |
| Gravimetric Extractables | The extractables level was equal to or less than 10 mg per 4-inch cartridge after 24 hours in water at controlled room temperature. |
| Indirect Food Additive | All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. |
| Non-Fiber Releasing | This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). |
| USP Bacterial Endotoxins | A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. |
| Dimensions
|
| Cartridge Nominal Length | 4 in. (10 cm) |
| Filtration Area | 0.18 m² |
| Device Size | 4 in. |
| Materials Information
|
| Chemistry |
- Polyvinylidene Fluoride (PVDF)
|
| Device Material |
|
| Seal Material | Silicone (SI) |
| Support Material | Polypropylene |
| Packaging Information
|
| Material Size | 6 |
| Material Package | Double Easy-Open bag |
| Specifications
|
| Oxidizable Substances | Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥500 mL |
