millipore,密理博,KWSCA3TBB1,Opticap XLT30 Milligard 1.2/0.5 µm 1 in. HB/HB

Description
Catalogue Number	KWSCA3TBB1
Trade Name	Opticap^®
Description	Opticap^® XLT30 Milligard^® 1.2/0.5 µm 1 in. HB/HB

Product Information
Format	Double Layer
Device Configuration	Capsule
Connections, Inlet/Outlet	25 mm (1 in.) Hose Barb
Filter Grade	Standard Milligard^® Media
Housing Material	Polypropylene (PP)
Maximum Differential Pressure, bar (psid)	3.5 bar (50 psid) @ 25 °C
Maximum Inlet Pressure, bar (psi)	5.5 bar (80 psi) @ 23 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
Good Manufacturing Practices	These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.
T-line/Gauge Port	T-line
Quality Level	MQ400

Biological Information
Bacterial Endotoxins	Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test
Media	Milligard^®
Sterilization	3 autoclave cycles of 30 min @ 121 °C; not in-line steam sterilizable

Physicochemical Information
Pore Size	1.2 / 0.5 µm
Inlet Connection	Hose Barb
Outlet Connection	Hose Barb
Gravimetric Extractables	The extractables level was equal to or less than 165 mg per capsule after 24 hours in water at controlled room temperature.
Indirect Food Additive	All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182.
Maximum Inlet Pressure (psig)	80 psig
Maximum Inlet Temperature	25 °C
Non-Fiber Releasing	This product was manufactured with a media combination which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
USP Bacterial Endotoxins	A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.