millipore,
密理博,KVEPS3TTT1,Opticap Sterile XLT 30
millipore Express SHR single layer 0.1 µm 1-1/2 in. TC/TC without gauge port
重要规格表
| Description
|
| Catalogue Number | KVEPS3TTT1 |
| Trade Name |
|
| Description | Opticap® Sterile XLT 30 millipore Express® SHR single layer 0.1 µm 1-1/2 in. TC/TC without gauge port |
| Product Information
|
| Device Configuration | Capsule |
| Connections, Inlet/Outlet | 38 mm (1-1/2 in.) Sanitary Flange |
| Connections, Vent/Drain | 1/4 in. Hose Barb with double O-ring Seal |
| Housing Material | Polypropylene (PP) |
| Maximum Differential Pressure, bar (psid) | Forward: 6.9 bar (100 psid) intermittent @ 25 °C; 5.5 bar (80 psid) @ 25 °C; 1.0 bar (15 psid) @ 80 °C. Reverse: 2.1 bar (30 psid) @ 25 °C, intermittent |
| Maximum Inlet Pressure, bar (psi) | 6.9 bar (100 psi) intermittent @ 23 °C; 5.5 bar (80 psi) @ 23 °C; 2.75 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C |
| Good Manufacturing Practices | These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. |
| T-line/Gauge Port | T-line |
| Quality Level | MQ400
|
| Biological Information
|
| Bacterial Endotoxins | Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test |
| Media | millipore Express® SHR |
| Sterility | Sterile |
| Sterilization | 3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable |
| Bacterial Retention | Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology. |
| Wettability | Hydrophilic |
| Physicochemical Information
|
| Pore Size | 0.1 µm |
| Inlet Connection | Sanitary Flange |
| Outlet Connection | Sanitary Flange |
| Bubble Point at 23 °C | ≥2586 mbar (37.5 psig) nitrogen with 70/30 % IPA/water |
| Indirect Food Additive | All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. |
| Maximum Inlet Pressure (psig) | 80 psig |
| Maximum Differential Pressure | 80 psi (5.5 bar) continuous
100 psi (6.9 bar) intermittent |
| Maximum Inlet Temperature | 25 °C |
| Non-Fiber Releasing | This product was manufactured with a millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). |
| TOC/Conductivity | After sterilization and a controlled water flush of 33 L, samples exhibited less than 500 ppb TOC per USP <643> and less than 1.3 µS/cm per USP <645> at 25 °C. |
| USP Bacterial Endotoxins | A sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. |
| Dimensions
|
| Cartridge Nominal Length | 30 in. (75 cm) |
| Length | 87.2 cm (34.3 in.) |
| Diameter | 10.7 cm (4.2 in.) |
| Filtration Area | 2.06 m² |
| Inlet to Outlet Width | 15.2 cm (6.0 in.) |
| Device Size | 30 in. |
| Inlet Connection Diameter | 1-1/2 in. |
| Outlet Connection Diameter | 1-1/2 in. |
| Materials Information
|
| Chemistry |
|
| Device Material |
|
| Seal Material | Silicone (SI) |
| Support Material | Polyester |
| Vent Cap Material | Polypropylene (PP) |
| Packaging Information
|
| Material Size | 1 |
| Material Package | Double Easy-Open bag |
| Specifications
|
| Oxidizable Substances | Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥4.5 L |
