millipore,密理博,KTGRA04TT3,Opticap XL4 Aervent 0.2 µm 1-1/2 in. TC/TC

产品信息
Device Configuration	取样皿滤膜
连接（入口/出口）	38 mm (1-1/2 in.) Sanitary Flange
连接（通风/排放）	1/4 in. Hose Barb with double O-ring Seal
外壳	Polipropilene
最大压差[巴（psi）]	Forward: 5.5 bar (80 psid) @ 25 °C; 1.0 bar (15 psid) @ 80 °C. Reverse: 4.1 bar (60 psid) @ 25 °C, intermittent
最大入口压力[巴（psi）]	5.5 bar (80 psi) @ 23 °C; 2.8 bar (40 psi) @ 60 °C; 1.0 bar (15 psi) @ 80 °C
欧洲压力设备指引	EMD millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark.
Quality Level	MQ400

生物信息
媒质	Aervent^®
灭菌	135 °C 时 30 分钟的 30 个高压高温周期；不可进行在线蒸汽消毒
细菌截留	Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology.
可湿润性	疏水

理化信息
孔径	0.2 µm
入口连接	Sanitary Flange
出口连接	Sanitary Flange
23°C时的泡点	70//30 % IPA/水中为≥1100 mbar (16 psig)
重量分析的提取物（%）	The extractables level was equal to or less than 15 mg after 24 hours in a 70/30% IPA/water mixture at controlled room temperature.
HydroCorr	≤0.25 mL/min @ 2.6 bar (38 psig)
23°C时的氮扩散	在 70//30 % IPA/水中、965 mbar (14 psig) 压力下为 ≤9 mL/min
最大入口压力（psig）	80 psig
最高入口温度	25 °C
非纤维释放	This product was manufactured with a PTFE membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).
USP Bacterial Endotoxins	A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test.