millipore,
密理博,KN12A3TTT1,Opticap XLT 30" Polygard CN 1.2 um 1.5" TC/TC 1/pk
重要规格表
| Description
|
| Catalogue Number | KN12A3TTT1 |
| Trade Name |
|
| Description | Opticap® XLT 30" Polygard® CN 1.2 um 1.5" TC/TC 1/pk |
| Product Information
|
| Format | Single Layer |
| Device Configuration | Capsule |
| Connections, Inlet/Outlet | 38 mm (1-1/2 in.) Sanitary Flange |
| Housing Material | Polypropylene (PP) |
| Good Manufacturing Practices | These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. |
| T-line/Gauge Port | T-line |
| Quality Level | MQ400
|
| Biological Information
|
| Bacterial Endotoxins | Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test |
| Media | Polygard®-CN |
| Sterilization | 3 autoclave cycles of 30 min @ 126 °C; not in-line steam sterilizable |
| Physicochemical Information
|
| Pore Size | 1.2 µm |
| Inlet Connection | Sanitary Flange |
| Outlet Connection | Sanitary Flange |
| Gravimetric Extractables | The extractables level was equal to or less than 165 mg per capsule after 24 hours in water at controlled room temperature. |
| Indirect Food Additive | All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. |
| Maximum Inlet Pressure (psig) | 80 psig |
| Maximum Inlet Temperature | 25 °C |
| USP Bacterial Endotoxins | A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. |
| Dimensions
|
| Cartridge Nominal Length | 30 in. (75 cm) |
| Device Size | 30 in. |
| Inlet Connection Diameter | 1-1/2 in. |
| Nominal Pore Size | 1.2 µm |
| Outlet Connection Diameter | 1-1/2 in. |
| Materials Information
|
| Chemistry |
|
| Device Material |
|
| Seal Material | Silicone (SI) |
| Support Material | Polypropylene |
| Vent Cap Material | Polypropylene (PP) |
| Packaging Information
|
| Material Size | 1 |
| Material Package | Double Easy-Open bag |
