millipore,
密理博,KHGEG3TTT1H,Gamma Compatible High Area Opticap XLT 30
millipore Express SHC 0.5 µm/0.2 µm 1-1/2 in. TC
重要规格表
| Description
|
| Catalogue Number | KHGEG3TTT1H |
| Trade Name |
|
| Description | Gamma Compatible High Area Opticap® XLT 30 millipore Express® SHC 0.5 µm/0.2 µm 1-1/2 in. TC |
| Product Information
|
| Connections, Inlet/Outlet | 38 mm (1-1/2 in.) Sanitary Flange |
| Connections, Vent/Drain | 1/4 in. Hose Barb with double O-ring seal |
| Housing Material | Polypropylene (PP) |
| Maximum Differential Pressure, bar (psid) | Forward: 6.9 (100) intermittent @ 25 °C; 5.5 (80) @ 25 °C; 1.0 (15) @ 80 °C. Reverse: 2.1 (30) @ 25 °C, intermittent |
| Maximum Inlet Pressure, bar (psi) | 6.9 (100) intermittent @ 25 °C; 5.5 (80) @ 25 °C; 2.75 (40) @ 60 °C; 1.0 (15) @ 80 °C |
| Good Manufacturing Practices | These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. |
| T-line/Gauge Port | T-line |
| Quality Level | MQ400
|
| Applications
|
| Key Applications |
|
| Biological Information
|
| Bacterial Endotoxins | Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test |
| Sterility | Non-Sterile |
| Sterilization | Gamma compatible to 45 kGy; 3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable |
| Bacterial Retention | Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology. |
| Wettability | Hydrophilic |
| Physicochemical Information
|
| Pore Size | 0.5 / 0.2 µm |
| Inlet Connection | Sanitary Flange |
| Outlet Connection | Sanitary Flange |
| Air Diffusion at 23 °C | ≤169.2 mL/min @ 2.75 bar (40 psig) in water |
| Bubble Point at 23 °C | ≥4000 mbar (58 psig) air with water |
| Indirect Food Additive | All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. |
| Maximum Inlet Pressure (psig) | 80 |
| Maximum Inlet Temperature | 25°C |
| Non-Fiber Releasing | This product was manufactured with a millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). |
| TOC/Conductivity | After sterilization and a controlled water flush of 63 L, samples exhibited less than 500 ppb TOC per USP <643> and less than 1.3 µS/cm per USP <645> at 25 °C. |
| Dimensions
|
| Cartridge Nominal Length | 30 in. (75 cm) |
| Length | 87.1 cm (34.3 in.) |
| Diameter | 10.7 in. (4.2 cm) |
| Filtration Area | 30000 cm2 |
| Inlet to Outlet Width | 15.2 cm (6.0 in.) |
| Device Size | 30 in. |
| Outlet Connection Diameter | 1.5 in. |
| Materials Information
|
| Chemistry |
- Hydrophilic Polyethersulfone (PES)
|
| Device Material |
- Polypropylene/Polysulfone
|
| Seal Material | Silicone (SI) |
| Support Material | Polyester |
| Vent Cap Material | Polypropylene (PP) |
| Packaging Information
|
| Material Size | 1 |
| Material Package | Double Easy-Open bag |
| Specifications
|
| Oxidizable Substances | Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥6 L |
