millipore,
密理博,KEGBG003HH3,Gamma Phobic Opticap XL 300 Express SPG 0.2 hose barb
重要规格表
| Description
|
| Catalogue Number | KEGBG003HH3 |
| Trade Name |
|
| Description | Gamma Phobic Opticap® XL 300 Express SPG 0.2 hose barb |
| Product Information
|
| Device Configuration | Capsule |
| Connections, Inlet/Outlet | 14 mm (9/16 in.) Hose Barb |
| Connections, Vent/Drain | 1/4 in. Hose Barb with double O-ring seal |
| Housing Material | Polypropylene (PP) |
| Maximum Differential Pressure, bar (psid) | Forward: 4.2 bar (60 psid) @ 25 °C; Reverse: 2.1 bar (30 psid) @ 25 °C, intermittent |
| Maximum Inlet Pressure, bar (psi) | 4.1 bar (60 psi) @ 23 °C |
| European Pressure Equipment Directive | EMD millipore Corporation® certifies that this product complies with the European Pressure Equipment Directive, 97/23/EC of 29 May 1997. This product has been classified under Article 3 § 3 of the Pressure Vessel Directive. It has been designed and manufactured in accordance with sound engineering practice to ensure safe use. In compliance with Article 3 § 3 of this Pressure Vessel Directive, this product does not bear the CE mark. |
| Good Manufacturing Practices | These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. |
| Quality Level | MQ400
|
| Applications
|
| Key Applications |
- Small scale single-use applications
|
| Biological Information
|
| Bacterial Endotoxins | Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test |
| Media | millipore Express® SPG |
| Sterility | Gamma |
| Sterilization | Gamma compatible to 45 kGy; 3 autoclave cycles of 60 min @ 123 °C; not in-line steam sterilizable |
| Bacterial Retention | Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology. |
| Wettability | Hydrophobic |
| Physicochemical Information
|
| Pore Size | 0.2 µm |
| Inlet Connection | Hose Barb |
| Outlet Connection | Hose Barb |
| Bubble Point at 23 °C | ≥1210 mbar (17.5 psig) air with 70/30 % IPA/water |
| Gravimetric Extractables | The extractables level was equal to or less than 3 mg after 24 hours in a 70/30% IPA/water mixture at controlled room temperature. |
| HydroCorr | ≤0.16 mL/min @ 2.6 bar (38 psig) |
| Maximum Inlet Pressure (psig) | 60 psig |
| Maximum Differential Pressure | 60 psi (4.1 bar) continuous |
| Maximum Inlet Temperature | 25 °C |
| Non-Fiber Releasing | This product was manufactured with a millipore Express® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). |
| TOC/Conductivity | After gamma irradiation and three autoclave cycles, the TOC was measured to be equal to or less than 3367 µg/device. |
| USP Bacterial Endotoxins | A sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. |
| Dimensions
|
| Length | 11.9 cm (4.7 in.) |
| Diameter | 5.6 cm (2.2 in.) |
| Filtration Area | 0.048 m² |
| Inlet to Outlet Width | 11.9 cm (4.7 in.) |
| Inlet Connection Diameter | 9/16 in. |
| Outlet Connection Diameter | 9/16 in. |
| Materials Information
|
| Chemistry |
|
| Device Material |
- Gamma stable polypropylene/Polysulfone
|
| Seal Material | Silicone (SI) |
| Support Material | Polyethylene |
| Vent Cap Material | Polypropylene (PP) |
| Packaging Information
|
| Material Size | 3 |
| Material Package | Double Easy-Open bag |
