millipore,
密理博,CVGB01TP3,Durapore Cartridge Filter 10 in. 0.22 µm hydrophobic Code 0
重要规格表
| Description
|
| Catalogue Number | CVGB01TP3 |
| Trade Name |
|
| Description | Durapore Cartridge Filter 10 in. 0.22 µm hydrophobic Code 0 |
| Product Information
|
| Device Configuration | Cartridge |
| Maximum Differential Pressure, bar (psid) | Forward: 5.5 bar (80 psid) @ 25 °C; 1.7 bar (25 psid) @ 80 °C; 0.35 bar (5 psid) @ 135 °C. Reverse: 3.5 bar (50 psid) @ 25 °C |
| Maximum Inlet Pressure, bar (psi) | Forward - 5.5 bar (80 psi) @ 25 °C; 1.7 bar (25 psi) @ 80 °C; 0.35 bar (5 psi) @ 135 °C; Reverse - 3.5 bar (50 psi) @ 25 °C |
| Cartridge Code | Code 0 (2-222) O-rings |
| Good Manufacturing Practices | These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. |
| Quality Level | MQ400
|
| Biological Information
|
| Bacterial Endotoxins | Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test |
| Media | Durapore® |
| Sterilization | 30 SIP cycles of 30 min @ 126 °C; 30 autoclave cycles of 60 min @ 126 °C |
| Bacterial Retention | Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology. |
| Wettability | Hydrophobic |
| Physicochemical Information
|
| Pore Size | 0.22 µm |
| Bubble Point at 23 °C | ≥1240 mbar (18 psig) nitrogen with 60/40 % IPA/water |
| Gravimetric Extractables | The extractables level was equal to or less than 20 mg per 10-inch cartridge after 24 hours in a 70/30% IPA/water mixture at controlled room temperature. |
| Nitrogen Diffusion at 23 °C | ≤10 mL/min @ 1.7 bar (25 psig) with water |
| Non-Fiber Releasing | This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). |
| USP Bacterial Endotoxins | A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. |
| Dimensions
|
| Cartridge Nominal Length | 10 in. (25 cm) |
| Diameter | 6.9 cm (2.7 in.) |
| Filtration Area | 0.69 m² |
| Device Size | 10 in. |
| Materials Information
|
| Chemistry |
- Polyvinylidene Fluoride (PVDF)
|
| Device Material |
|
| Seal Material | Silicone (SI) |
| Support Material | Polypropylene |
| Packaging Information
|
| Material Size | 3 |
| Material Package | Double Easy-Open bag |
