millipore,
密理博,CVDI03TPS,Durapore CVDI Cartridge Filter 30 in. 0.22 µm Code 0 Silicone
重要规格表
| Description
|
| Catalogue Number | CVDI03TPS |
| Trade Name |
|
| Description | Durapore® CVDI Cartridge Filter 30 in. 0.22 µm Code 0 Silicone |
| Product Information
|
| Device Configuration | Cartridge |
| Maximum Differential Pressure, bar (psid) | Forward: 5.5 bar (80 psid) @ 25 °C; 1.7 bar (25 psid) @ 80 °C; 0.35 bar (5 psid) @ 135 °C. Reverse: 3.5 bar (50 psid) @ 25 °C, intermittent |
| Cartridge Code | Code 0 (2-222) O-rings |
| Good Manufacturing Practices | These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. |
| Quality Level | MQ400
|
| Biological Information
|
| Media | Durapore® |
| Sterility | Other |
| Bacterial Retention | Samples of the Durapore® membrane used in this cartridge were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology. |
| Wettability | Hydrophilic |
| Physicochemical Information
|
| Pore Size | 0.2 µm |
| Air Diffusion at 23 °C | ≤40 mL/min @ 2.75 bar (40 psig) in water |
| Bubble Point at 23 °C | ≥3100 mbar (45 psig) air with water |
| Gravimetric Extractables | The extractables level was equal to or less than 25 mg per 10-inch cartridge after 24 hours in water at controlled room temperature. |
| Indirect Food Additive | All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. All component materials meet the requirements of the EU framework regulation [1935/2004/EC] regarding materials and articles intended to contact food. |
| Non-Fiber Releasing | This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). |
| Dimensions
|
| Cartridge Nominal Length | 30 in. (75 cm) |
| Diameter | 6.9 cm (2.7 in.) |
| Filtration Area | 2.07 m² |
| Device Size | 30 in. |
| Materials Information
|
| Chemistry |
- Polyvinylidene Fluoride (PVDF)
|
| Device Material |
|
| Seal Material | Silicone (SI) |
| Support Material | Polypropylene |
| Packaging Information
|
| Material Size | 1 |
