millipore,
密理博,CLGL01TP3,Durapore II Cartridge Filter 10 in. 0.22 µm Code 0
重要规格表
| Description
|
| Catalogue Number | CLGL01TP3 |
| Trade Name |
|
| Description | Durapore® II Cartridge Filter 10 in. 0.22 µm Code 0 |
| Product Information
|
| Device Configuration | Cartridge |
| Cartridge Code | Code 0 (2-222) O-rings |
| Good Manufacturing Practices | These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. |
| Quality Level | MQ400
|
| Biological Information
|
| Media | Durapore® II |
| Sterility | Other |
| Bacterial Retention | Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology. |
| Wettability | Hydrophilic |
| Physicochemical Information
|
| Pore Size | 0.22 µm |
| Gravimetric Extractables | The extractables level was equal to or less than 30 mg per 10-inch cartridge after a 1.5 L flush and 24 hours in water at controlled room temperature. |
| Indirect Food Additive | All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. |
| Non-Fiber Releasing | This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). |
| USP Bacterial Endotoxins | A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. |
| Dimensions
|
| Cartridge Nominal Length | 10 in. (25 cm) |
| Device Size | 10 in. |
| Materials Information
|
| Chemistry |
- Polyvinylidene Fluoride (PVDF)
|
| Packaging Information
|
| Material Size | 3 |
