millipore,
密理博,CHGL01TP3,Durapore Cartridge Filter 10 in. 0.45/0.22 µm Code 0
重要规格表
| Description
|
| Catalogue Number | CHGL01TP3 |
| Trade Name |
|
| Description | Durapore® Cartridge Filter 10 in. 0.45/0.22 µm Code 0 |
| Product Information
|
| Device Configuration | Cartridge |
| Maximum Differential Pressure, bar (psid) | Forward: 5.5 bar (80 psid) @ 25 °C; 1.7 bar (25 psid) @ 80 °C; 0.35 bar (5 psid) @ 135 °C. Reverse: 3.5 bar (50 psid) @ 25 °C, intermittent |
| Maximum Inlet Pressure, bar (psi) | Forward - 5.5 bar (80 psi) @ 25 °C; 1.7 bar (25 psi) @ 80 °C; 0.35 bar (5 psi) @ 135 °C; Reverse - 3.5 bar (50 psi) @ 25 °C, Intermittent |
| Cartridge Code | Code 0 (2-222) O-rings |
| Good Manufacturing Practices | These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. |
| Quality Level | MQ400
|
| Biological Information
|
| Bacterial Endotoxins | Aqueous extraction contains ≤0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test |
| Media | Multilayer Durapore® |
| Sterility | Other |
| Sterilization | 30 SIP cycles of 30 min @ 135 °C; 30 autoclave cycles of 60 min @ 126 °C |
| Bacterial Retention | Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology. |
| Wettability | Hydrophilic |
| Physicochemical Information
|
| Pore Size | 0.45 / 0.22 µm |
| Air Diffusion at 23 °C | ≤10.8 mL/min @ 2.75 bar (40 psig) in water |
| Bubble Point at 23 °C | ≥3450 mbar (50 psig) air with water |
| Indirect Food Additive | All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177-182. |
| Non-Fiber Releasing | This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). |
| TOC/Conductivity | After sterilization and a controlled water flush of 16 L per 10-inch cartridge, samples exhibited less than 500 ppb TOC per USP <643> and less than 1.3 µS/cm per USP <645> at 25 °C. |
| USP Bacterial Endotoxins | A sample aqueous extraction contains less than 0.25 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. |
| Dimensions
|
| Cartridge Nominal Length | 10 in. (25 cm) |
| Diameter | 6.9 cm (2.7 in.) |
| Filtration Area | 0.55 m² |
| Device Size | 10 in. |
| Materials Information
|
| Chemistry |
- Polyvinylidene Fluoride (PVDF)
|
| Device Material |
|
| Seal Material | Silicone (SI) |
| Support Material | Polypropylene |
| Packaging Information
|
| Material Size | 3 |
| Specifications
|
| Oxidizable Substances | Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥1.5 L |
