millipore,
密理博,CCGL71TP1,Charged Durapore Cartridge 10 in. 0.22 µm Code 7
重要规格表
| Description
|
| Catalogue Number | CCGL71TP1 |
| Trade Name |
|
| Description | Charged Durapore® Cartridge 10 in. 0.22 µm Code 7 |
| Product Information
|
| Device Configuration | Cartridge |
| Maximum Differential Pressure, bar (psid) | Forward: 5.5 bar (80 psid) @ 25 °C; 1.7 bar (25 psid) @ 80 °C; 0.35 bar (5 psid) @ 135 °C. Reverse: 3.5 bar (50 psid) @ 25 °C |
| Maximum Inlet Pressure, bar (psi) | Forward - 5.5 bar (80 psi) @ 25 °C; 1.7 bar (25 psi) @ 80 °C; 0.35 bar (5 psi) @ 135 °C; Reverse - 3.5 bar (50 psi) @ 25 °C |
| Cartridge Code | Code 7 (2-226) O-rings w/locking-tabs |
| Good Manufacturing Practices | These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices. |
| Quality Level | MQ400
|
| Biological Information
|
| Bacterial Endotoxins | Aqueous extraction contains ≤0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) Test |
| Media | Charged Durapore® |
| Sterility | Other |
| Sterilization | 10 SIP cycles of 30 min @ 135 °C |
| Bacterial Retention | Samples were quantitatively retentive of a minimum Brevundimonas diminuta challenge concentration of 1 x 10⁷ CFU/cm² using ASTM® F838 methodology. |
| Wettability | Hydrophilic |
| Physicochemical Information
|
| Pore Size | 0.22 µm |
| Air Diffusion at 23 °C | ≤10 mL/min @ 2.1 bar (30 psig) in water |
| Bubble Point at 23 °C | ≥2760 mbar (40 psig) air with water |
| Flow Rate | 45 L/min @ 1.2 bar ΔP |
| Gravimetric Extractables | The extractables level was equal to or less than 20 mg per 10-inch cartridge after 24 hours in water at controlled room temperature. |
| Non-Fiber Releasing | This product was manufactured with a Durapore® membrane which meets the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6). |
| USP Bacterial Endotoxins | A sample aqueous extraction contains less than 0.5 EU/mL as determined by the Limulus Amebocyte Lysate (LAL) test. |
| Dimensions
|
| Cartridge Nominal Length | 10 in. (25 cm) |
| Diameter | 6.9 cm (2.7 in.) |
| Filtration Area | 0.69 m² |
| Device Size | 10 in. |
| Materials Information
|
| Chemistry |
- Polyvinylidene Fluoride (PVDF)
|
| Device Material |
|
| Seal Material | Silicone (SI) |
| Support Material | Polypropylene |
| Packaging Information
|
| Material Size | 1 |
| Material Package | Double Easy-Open bag |
| Specifications
|
| Oxidizable Substances | Will meet the USP Oxidizable Substances Test requirements after a water flush of ≥500 mL |
